Dellorto Parts |
|
DRLA SPC |
  DRLA Spacer Plates To Clearance Inlet Banjos For Air Cleaners |
|
|
|
DRLA 36G |
  DRLA 36mm Carburettor Base To Inlet Manifold Gaskets (Aerospace) |
|
|
|
DRLA 40G |
  DRLA 40mm Carburettor Base To Inlet Manifold Gaskets (Aerospace) |
|
|
|
DRLA 45G |
  DRLA 45mm Carburettor Base To Inlet Manifold Gaskets (Aerospace) |
|
|
|
DRLA 002 |
  DRLA Choke Mechanism Blanking Plate - For Deleting Choke Mechanism |
|
|
|
DRLA BJS |
  DRLA Fuel Inlet Banjo Sealing Washers - PTFE (Teflon) |
|
|
|
DRLA Thr |
  DRLA Throttle Actuation Lever Arm (Special Volksbolts Design) |
|
|
|
DRLA S2.0 |
  DRLA 2.0mm Throttle Shaft Spacer Piece |
|
|
|
DRLA S1.0 |
  DRLA 1.0mm Throttle Shaft Spacer Piece |
|
|
|
DRLA S0.5 |
  DRLA 0.5mm Throttle Shaft Spacer Piece |
|
|
|
M7 NUT |
  DRLA Throttle Spindle End Nuts (M7 Thread) |
|
|
|
DRLA Tab |
  DRLA Spindle Nut Tab Washer - Special Dellorto Shape |
|
|
|
DRLA Stud |
  DRLA Air Cleaner & Velocity Stack Studs And Nuts - For VW Air Cleaners |
|
|
|
STOP L |
  DRLA Left Hand Sided (LHS) Thottle Spindle Stop |
|
|
|
STOP R |
  DRLA Right Hand Sided (RHS) Thottle Spindle Stop |
|
|
|
Grub |
  DRLA Aux.Venturi Grub Screws And Nuts (M7 Thread) |
|
|
|
DRLA Idle |
  DRLA "Tall"" Idle Jet Holders |
|
|
|
DRLA IJO |
  DRLA Idle Jet O Rings - 5 Pack |
|
|
|
DRLA MNO |
  DRLA Manometer Port O Rings - 5 Pack |
|
|
|
M8 11ATF |
  Thin Wall M8 Nuts - 11mm Across The Flats (ATF) For Use In Tight Spaces |
|
|
|
5.6/8.0 |
  In-Line Fuel Hose Adapter - Steps 5.6mm Hose Up To 8mm For DRLA Inlets |
|
|
|
Weber Parts |
|
IDF 36G |
  IDF 36mm Carburettor Base To Inlet Manifold Gaskets (Aerospace) |
|
|
|
IDF 40G |
  IDF 40mm Carburettor Base To Inlet Manifold Gaskets (Aerospace) |
|
|
|
IDF Thr |
  IDF Throttle Actuation Lever Arm & Washer(Special Volksbolts Design) |
|
|
|
IDF 001 |
  IDF Choke Mechanism Blanking Plate - For Deleting Choke Mechanism |
|
|
|
  |
  |
  |
|
|
DCOE Tab |
  DCOE Sidedraft - Velocity Trumpet Tab Washers - 45mm/48mm (DCOE 45/48) |
|
|
|
DCOE Tab2 |
  DCOE Sidedraft - Velocity Trumpet Tab Washers - 40mm (DCOE 40) |
|
|
|
  |
  |
  |
|
|
M7 NUT |
  Throttle Spindle End Nuts (M7 Thread) |
|
|
|
M8 11ATF |
  Thin Wall M8 Nuts - 11mm Across The Flats (ATF) For Use In Tight Spaces |
|
|
|
5.6/8.0 |
  In-Line Fuel Hose Adapter - Steps 5.6mm Hose Up To 8mm For IDF Inlets |
|
|
|